Product description
The key points of vacuum brazing are high vacuum, high cleanliness and high temperature uniformity, which are the most important aspects of filler selection process and process parameters. For the heat treatment of some tubular, thin and long thin-walled rackets, the vertical structure with top or bottom loading is recommended, which can effectively solve the deformation problem. Provide horizontal and vertical structure, at the same time can customize a variety of non-standard equipment.
Features
Furnace body
The structure of double cylinder is carbon steel.
Equipped with water cooling system to ensure safe contact of shell.
Heating chamber
The nickel chromium heating element can reach 750 ℃. Equipped with high quality SS304 reflecting screen and frame, heating in different areas can be controlled independently, and the design ensures even temperature heating. Each heating zone can also be disassembled separately.
Heat treatment materials
It is suitable for aluminum plate fin heat exchanger, automobile radiator, automobile air conditioner evaporator, condenser, radar net antenna and waveguide, etc.
Vacuum system
The vacuum degree is the level requirement of 10-3 PA. Equipped with mechanical pump, roots pump and diffusion pump, three-stage vacuum system.
Under no-load / dry degassing, the required vacuum degree shall not exceed 50 minutes.
Control system
It is easy to operate and can be operated by one person;
The whole operation can be recorded automatically.
On 2018-08-08 11:45:46
