Product Use:
1, The gas melting aluminium furnace can be used for smelting,casting and heat plating of nonferrous metals such as
aluminum,zinc,silver,lead,tin and copper.
2 ,features:warming faster.
3, the gas(liquefied petroleum gas)as fuel,clean and safe,so that the workshop clean and tidy,easy to manage.
4,The utility model has the advantages of high thermal efficiency and low running cost.Compared with the electric heating crucible furnace,the utility model has the advantages of large melting power,high efficiency and low energy consumption,andcompletely eliminates the cost of replacing the electric heating body.
5,The use of imported international brands of gas burner,complete combustion,exhaust emissions of no pollution,the design of multiple heat channel,make full use of the energy generated by burner,can greatly improve the heat efficiency,energy saving effect is remarkable.
6, Especially suitable for electric power shortage and power shortage areas,so as to avoid the need to enlarge production and increase power capacity.
7, High thermal efficiency:can adapt to pressure fluctuations,self adjustment of a distribution of air(ie gas pressure,inhalation of primary air more;gas pressure is small.
8, High safety:this burner is equipped with small,inhalation of less primary air),burning sufficient,high thermal efficiency.
9, Fuel adaptability:the burner only needs to replace a small number of components, it can be applied to natural gas,liquefied petroleum gas,gas,liquefied petroleum gas mixture and other gas.
10, Gas valve group ,The furnace can be directly connected to the low pressure gas pipeline,does not need the station.The gas valve is a low pressure valve.The gas valve is composed of three parts the manual valve electric valve gas pressure regulating valve and pressure valve electric boiler control valve for some models with a valve,according to the requirements of users can also set the maximum pressure of the gas switch,the minimum gas pressure switch;gas pressure regulating valve to the valve before the pressure 5-11 inches of water(127mm-279.4mm water column water column),the valve pressure is not less than 3.5 inches of water (88.9mm water column).LPG valves require 11 inch water column.
11, gas protection device,
The gas pipeline is arranged on the highest and the lowest pressure switch pressure switch,when gas or gas pressure is reduced to certain value,the minimum pressure switch,the system automatically shut down;when the gas pressure is too high,the highest pressure switch,the system automatically shut down.
On 2018-08-08 11:45:46
