CNC lathe and turning and milling CNC machine tools difference between

Numerical control lathe and turning and milling compound numerical control machine tool difference

What is a CNC lathe? Let's first look at the explanation of Baidu Encyclopedia: "CNC lathe is currently used more widely one of the CNC machine tools. It is mainly used for cutting the inner and outer cylindrical surface of shaft parts or disk parts, the inner and outer cone surface of any cone Angle, the inner and outer surface of complex rotation, cylinder, taper thread and so on, and can cut grooves, drill holes, reaming, reaming and boring, etc. The processed parts are processed automatically according to the pre-programmed processing procedure. We put the parts of the processing craft route, process parameters and tool trajectory, displacement, cutting parameters and auxiliary functions, in accordance with the instruction code and procedures prescribed by the CNC machine format write into the processing program list, then this program list the contents of the records in the control medium, and then input to the numerical control machine tool numerical control device, which command machining parts."

The main features are: high performance, high precision, low noise, compared with the ordinary lathe, high degree of automation, with automatic feeding can be composed of automatic processing unit.

Modern metal processing industry with respect to the manner of high efficiency and high profits, low-cost processing requirements, compound machine has become one of the machine tool product development trend, as in the machine tool has a proportion of lathe and milling machine if they could be together, no doubt will greatly improve the machine's machining scope and work efficiency, improve the machining precision and so on. Since the naissance of compound machine tool for turning and milling last century, this kind of machine tool has been developed rapidly and has been widely used.

Simply speaking, turning and milling compound CNC lathe is on the basis of the CNC lathe to increase a small processing center, so that the CNC lathe increased the milling function. 1-8 milling power heads can be added to CNC lathes, process integration, high processing precision, saving processing time.

The turning-milling compound CNC lathe has the following advantages:

1. High precision: avoid manual and machine tool errors caused by process dispersion;

2. High efficiency: effectively reduce the production preparation time and improve the utilization rate of machine tools;

3. Cost reduction: Multiple processes are completed in turn, reducing the number of machine tools, making it easier to plan production and saving investment cost and workshop area.

It is because of turning and milling compound machine tools have so many advantages, more importantly, these advantages are in line with the modern metal processing industry for high efficiency, high profit, low cost processing methods. So the development of turning and milling machine tools will inevitably be promoted to a higher level by the market.

Based on the current development status and market requirements for the performance of this kind of machine tools, an improved compound CNC lathe is produced. The original CAK6130h CNC lathe was transformed from an ordinary CNC lathe into a CAK6130hb CNC lathe with dual functions of turning and milling through relatively low investment. In the next few years or even one or two decades believe that this kind of machine tools will be favored in a certain range.

CAK6130h turning and milling compound CNC machine tool has the following advantages

1. The whole casting bed body and guide rail have large span and good rigidity;

2. Large X-direction travel, installation and use of various functional parts;

3. Complete clamping once for turning, milling, drilling and tapping, with high precision and efficiency;

4. Servo spindle positioning, high indexing accuracy, automatic brake processing quality is stable and reliable; 360 degree arbitrary positioning, minimum indexing unit 0.001 DEg

5, imported milling power head, high reliability, available to choose more specifications, optional: double milling power head, three milling power head, two-way double milling power head, two-way four milling power head;

6. Spindle speed is 4000RPM, fast moving speed X: 15m/min Z:20m/min