CVD Vacuum Tube Furnace
1600C Vacuum Tube Furnace
1600C Vacuum Tube Furnace is a split-able three-zone tube furnace without processing tube and flange, which is designed for customer DIY a tube furnace up to 5" diameter based on their own idea. hree 30 segments temperature controllers are installed with three K type thermal couples. Microprocessor-based self-tuning PID provides excellent control with no overshooting and +/- 1 °C accuracy.
It is an excellent furnace for sample annealing, diffusion and sintering in various gas atmosphere up to 1200°C.
1600C Vacuum Tube Furnace Specification
Furnace structure | Double layer steel case with two cooling fans which ensure low surface temperature; Energy saving high purity fibrous alumina insulation Can accept processing tube upto 5" diameter. Two fibrous ceramic tube blocks are included for blocking heat radiation from inside of the tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating). Temperature controller can be separated from furnace and operate the furnace in remote location.
|
Rated voltage | AC 208-240V Single Phase, 50/60 Hz (30A breaker required; Powder cord is included without plug) |
Power consumption | 5 KW Max. |
Heating elements
| Spring Wires of Fe-Cr-Al Alloy |
Heating zone length | Three zones: 610mm (24") in total Z1-Z2- Z3:152.4mm (6") + 304.8mm (12") + 152.4mm (6") +/-1ºC Constant Temperature Zone: 260 mm length +/-2ºC Constant Temperature Zone: 480 mm length
|
Quartz Tube & Vacuum Flange | |
Heating Temperature
| Max. Heating Temperature: 1200°C; Continuous Heating Temperature: 1100°C; Max. Heating Rate: 20°C/min;
|
Temperature Controllers | Three PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time. Built in overheating & broken thermocouple protection. Over temperature protection and alarm allows for operation without attendant(s). +/- 1 ºC temperature accuracy. Three K type thermocouples (one for each zone). RS485 Communications Port.
Optional: o The furnace may be operated by PC by installing a control module. Please order a control module at extra cost. o If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems.
|
