Correct and safe operation process of heat treatment processing

Dongguan Xinfei heat treatment plant is a large-scale heat treatment and processing plant in Dongguan. Our company has been processing heat treatment for Dongguan enterprises for a long time, and we know the correct and safe operation process of heat treatment and processing, so as to avoid accidents!

Correct and safe operation process of heat treatment processing:

1、 Clean up the operation site, check whether the power supply, measuring instruments and various switches are normal, and whether the water source is unobstructed.

2、 Operators shall wear labor protection articles.

3、 Turn on the universal change-over switch of the control power supply, raise and lower the temperature in stages according to the technical requirements of the equipment, extend the service life of the equipment and keep the equipment in good condition.

4、 Pay attention to the furnace temperature of the heat treatment furnace, adjust the speed of the mesh belt, grasp the temperature scale required for different materials, ensure the hardness of the workpiece, the surface straightness and the oxide layer, and do a good job of safety.

5、 Pay attention to the furnace temperature of the tempering furnace, adjust the speed of the mesh belt, open the exhaust air, and make the workpiece meet the quality requirements after tempering.

6、 We should stick to our posts in our work.

7、 Necessary fire-fighting equipment shall be equipped and familiar with the use and maintenance methods.

8、 When the machine is stopped, check that all the control switches are closed, and then close the universal transfer switch