Turning tools belong to vulnerable parts. The cost of buying new ones for damage increases. After repair, they can still be used, greatly reducing the production cost of the enterprise. What are the characteristics of high frequency brazing equipment for turning tools?
Turning tool is a kind of tool with one cutting part for turning. The cutting part of the turning tool consists of the main cutting edge, the auxiliary cutting edge, the front tool face, the main rear tool face, the auxiliary rear tool face and the sharp angle of the tool. Turning tool is one of the most widely used cutting tools. The working part of turning tool is the part of producing and processing chips, including the structure of cutting edge, chip breaking or rolling, chip discharging or chip storage space, cutting fluid channel and other structural elements.
Turning tools are used in various lathes, such as outer circle, inner hole, end face, thread, groove, etc. it is necessary to connect the cutting edge part and cutter body part by welding with high-frequency welding machine of turning tools. After high-temperature melting, alloy, high-speed steel, cubic boron nitride, diamond, ceramic and other material blades are consistent with groove shape through dehydrated borax, copper sheet, ferromanganese, glass powder and other solders The cutter bars are bonded together to meet the use requirements of machining operation. At present, the most widely used welding turning tool is cemented carbide. Because of the high hardness of cemented carbide, it can meet the use requirements of most of the processed materials, and the cost is relatively low compared with other materials, so it is widely used.
Features of high frequency brazing equipment for turning tools
1. The device is small in size, light in weight, portable and portable;
2. Simple and convenient installation, just connect the power supply, inductor and water inlet and outlet pipe to start the machine;
3. High heating accuracy, especially suitable for small diameter pipe welding, butt welding, and the thickness of thin saw blade quenching;
4. There is no need to heat the workpiece as a whole. The coil can be designed to selectively heat the workpiece locally or as a whole with high heating efficiency;
5. It can be controlled manually, set the heating time with the panel, controlled automatically, and equipped with foot switch, which is more convenient and convenient
6. High frequency heating furnace has stable performance, low failure rate, low maintenance cost and long service life.
Lsw-20 / 30 application field:
1. Diamond saw blades and drilling tools such as drills.
2. Welding of bit, coal bit, rivet bit and pick.
3. Welding of turning tool, planer, milling tool and various woodworking tools.
4. Welding of compressor pipe fitting, transformer and motor copper wire.
5. Quenching treatment of auto parts and motorcycle parts.
6. Heat treatment of pliers, spanners, screwdrivers, hammers, axes, etc.
Main technical parameters:
Model: 20 / 30
Input power: 20kW / 30KW
Input voltage: single-phase 220V 50-60Hz, three-phase 380V 50-60Hz
Oscillation frequency: 25-40khz
Volume:
20kW: 480 × 225 × 450mm3
30KW: 600×265×540mm3
Turning tool welding machine is widely used, not only for turning tool welding, but also for drill pipe welding, milling tool welding, diamond saw blade welding, pick welding, pipe fitting socket, pipe and flange, shaft and shaft sleeve, cutting tool head saw blade, etc. When welding the turning tool, the speed is very fast, and there is no open fire, reducing pollution, ensuring the working environment of workers, and realizing environmental protection production.
On 2018-08-08 11:45:46
