Detailed decompression filter plate maintenance method, in the water treatment for the use of filter press is more and more common, but for its filter plate in the use of a long time is more likely to cause damage to the phenomenon of what kind of method we should use for maintenance?
1. Filter press filter plate clean the groove and leak out the new surface. Clean it with a small saw blade.
2. The ratio of black and white repair agents on the filter plate of the press is 1:1
3. Apply the prepared patches to the grooves and then add a little more.
4. Press the filter plate to quickly set the press cloth, press the filter plate together, make the repair agent and the press cloth stick together, and press the groove at the same time
5. After the filter plate of the press is extruded for a period of time, the viscose naturally forms and no longer changes. At this point, it can be used normally.
On 2018-08-08 11:45:46
