When the well furnace is used for a long time, carbon ash may be produced after the materials are burned. If the carbon removal is not complete, there may be many hazards. Some people may ask: what are the hazards of incomplete furnace carbon removal? The following shaft furnace manufacturers Tianli thermal small series to give you a detailed explanation.
Hazard 1: incomplete carbon removal in the furnace of well furnace will lead to inaccurate temperature measurement of thermocouple due to carbon deposition and other reasons, as well as high temperature of heating body, which will damage the heating body in serious cases.
Hazard 2: if the furnace carbon removal is not complete, there will be incomplete methane cracking, less atmosphere and other phenomena, which will seriously affect the process quality.
In addition, Tianli Thermal Engineering Co., Ltd., a well furnace manufacturer, suggests that carbon removal should be carried out in time. In the process of carbon removal, it is necessary to close the main valve of methanol furnace, close the outlet ball valve of methanol flowmeter, open the upper ball valve, and use small steel bar or compressed air to discharge the carbon deposit from the outlet of lower ball valve out of the furnace. If the carbon deposition in the furnace reactor is serious, it is necessary to open the reactor to enter its interior for cleaning.
About the knowledge of furnace carbon removal, well furnace manufacturer Tianli thermal engineering will explain to you here. If you want to know more about it, you can pay attention to our website.
On 2018-08-08 11:45:46
