As the name suggests, the rotary furnace is mainly used for experiments, and is mostly used for quantitative analysis of sintering and ashing tests. It is a kind of intermittent resistance furnace, but not to say that intermittent electric furnace is the experimental electric furnace. It is mainly used in experiments, mostly used for quantitative analysis of sintering, ashing test, is a kind of intermittent resistance furnace. Nowadays, it is used for experiment and small batch production in colleges and universities, industrial and mining enterprises.
Its resistance wire is generally arranged in the relevant furnace firebrick hole. Sometimes, a part of the resistance wire is burned off, resulting in the single electric furnace can not be used, double parallel electric furnace unilateral heating, affecting the furnace temperature uniformity and increase the heating time. After the above situation occurs, the electric furnace can be turned over 90° so that the furnace door touches the ground. Screw the screw that fastens the iron plate of the back wall, remove the iron plate, and take out the thermal insulation brick at the back end, and then the firebrick and resistance wire of the back wall can be seen. Short connect the two holes of rhJ circuit, l bad technology is installed without bricks and back wall iron plate as is, the furnace can continue to use.
On 2018-08-08 11:45:46
