How to select high frequency quenching and medium frequency quenching equipment?

High frequency quenching equipment and intermediate frequency quenching equipment on the same principle. It is a method to make the surface of workpiece heated quickly and then cooled immediately by induction heating current. Due to the skin-warming effect of high-frequency and intermediate frequency currents, this method only strengthens the surface within a certain depth range of the workpiece, while the core basically maintains the structure and performance before heat treatment, thus obtaining a complex of high strength, high wear resistance and high toughness.

First of all, high frequency quenching equipment: high frequency quenching circulating hard layer is generally 1-3mm, current frequency is 30-80khz, suitable for the workpiece hardening degree is relatively shallow, such as small gear, small shaft and other small workpiece products;

Thirdly, intermediate frequency quenching equipment: the hardening degree of intermediate frequency quenching is generally 2-10mm (penetrable), and the current frequency is 1-10khz, which can be used for the quenching of larger workpiece, such as larger gear workpiece, larger bearing products, etc.

High-frequency quenching equipment and intermediate frequency quenching equipment also have a common feature, that is, local heating quenching can significantly reduce the deformation of quenching workpiece, energy saving cost to reduce the loss.