So far, it can be said that the degree of familiarity and understanding of this kind of grinder has reached a certain degree. However, compared with the expected goal, there is still a big gap. Therefore, this work should continue, and can not stop and end, otherwise, it can not reach the standard. Therefore, next, we will continue this topic, so that everyone can make progress and development on their learning path.
1. If the oil seal of internal grinder is damaged, or there is oil leakage, how to solve it? In addition, this kind of grinder in grinding the inner circle, which tool is mainly used?
If the oil seal of internal grinder is damaged, or there is oil leakage problem, then the oil seal should be removed, so as to find out the real cause of oil leakage, which can be effectively and thoroughly solved. If this kind of grinder is used to grind the inner circle, then the chuck clamp is mainly used.
2. On the internal grinder, how to determine whether the grinding head is high or low relative to the center of the headstock? In addition, if the workpiece size is unstable, are there many reasons?
On the internal grinder, it is easy to judge whether the grinding head is high or low relative to the center of the headstock, because the chuck of the spindle table of the grinder is used to clamp standard parts, and the spindle of the internal grinder is also tested by standard parts. Therefore, the above conclusion can be reached.
If, the internal grinder grinding out of the workpiece size is not stable, then, there are many reasons, and this is a more complex problem, there are many related factors. Therefore, we can only carry out investigation one by one to determine the specific reasons, so that we can take effective measures to completely solve the problem. Moreover, it can also refer to some principles and normative steps to find the reasons.
On 2018-08-08 11:45:46
