Introduction of well furnace burner

The burner of the furnace is an automatic igniter with flame detection. After normal ignition, in case of sudden power failure, the solenoid valve will automatically cut off the gas supply in the gas path. At this time, it is necessary to re-open the solenoid valve switch button, so that the gas is re-sent into the furnace burner, but we design matching electronic ignition on the burner and with flame detection, as long as the gas into the nozzle electronic ignition will automatically ignite, ignite the gas combustion.

If the power failure is limited by the fire, the flame detector will automatically immediately close the solenoid valve at the front of each burner and cut off the burning gas. When the gas enters the burner, the automatic igniter can automatically start the fire without manual ignition, which can reduce the labor intensity of the workers and play the role of well furnace protection.