The induction heating machine of long line material heat treatment line is suitable for induction heat treatment of various long axis parts, instead of traditional well heating furnace and trolley type heating furnace. The PLC control system is used to realize the automatic feeding, heating, spray cooling, high temperature tempering and automatic blanking of the workpiece.
to configure
1. It has the function of automatic feeding and unloading.
2. The heating has multi-stage heating function, ensuring the uniformity of heating temperature, and at the same time, the temperature measurement instrument is used to measure the heating temperature of the bar material before and after the workpiece is cooled and tempered.
3. Quenching power, tempering power, quenching temperature, tempering temperature and workpiece feed rate are all controlled automatically by the system, which can provide closed-loop control function of temperature.
4. The parameters of heating power, power supply, current, frequency, tempering power, tempering power voltage, current, frequency, heating feed speed, quenching temperature and tempering temperature are set and recorded by the system. The processing parameters can be traced back.
5. The high strength welding bed body, after aging treatment, then finishing, stable performance.
6. Rotating moving motor of workpiece: frequency conversion and speed regulation.
7. Sensor replacement: manual water and electricity quick change.
8. The coil adopts variable turn distance design, which is efficient and energy-saving.
9. The power supply and heater have water pressure protection, water flow protection, water temperature protection, air pressure protection and photoelectric safety protection.
10. Control box: control cabinet integrated control box.
11. Alarm: sound / light fault alarm, alarm information is displayed in control interface and recorded.
12. Sensor and water jet cooling interface: stainless steel / Brass quick change joint is adopted.
13. Electric control mode: plc/ touch screen +plc.
14. The machine tool control system can monitor and record all processing parameters, and it has the functions of history query, online monitoring, output printing and so on.
15. The automatic feeding and unloading mechanism is used to realize the automatic quality adjustment of the equipment.
On 2018-08-08 11:45:46
