Product Description
The integrated debinding and sintering furnace is the fantastic industrial furnace for degreasing and sintering of powder metallurgies and metal injection molding products including stainless steel, hard alloy, superalloy, high density alloy, ceramic material, magnetic material and NdFeB, etc.This powder metallurgy equipment offers continuous workflow covering degreasing, pre-sintering, sintering and fast cooling. Consequently, daunting procedures are successfully avoided, such as repeatable transport, heating and cooling to name a few. As a result, our customers benefit from drastically reduced quality failure, labor load, production cycle and cost.
Equipment Features
1. Independent heating device and temperature measuring component is adopted to realize heat uniformity.
2. Our vacuum degreasing furnace is renowned for utilization of high efficiency SWEEP-GASTM degreasing system, covering grease collecting, filtering, rough cleaning and fine cleaning. Unique vapor degreasing system is also available for amazing speed and efficiency.
3. Directional air injection facilitates degreasing effect in a holistic approach. Moreover, constant slight-negative pressure is maintained inside the vacuum sintering furnace, whereby restraining metal volatilization and bettering product compactness and quality.
4. Program temperature controller is employed. PLC is responsible for fully automatic control on temperature and production procedure. Furthermore, our vacuum furnace is applauded for cutting-edge interlocking function, as well as audible and visual alarms on overpressure, overheat or too high watertemperature.
5. Internal circulation system adopts high efficiency heat exchanging technique to blow workpiece in multiple directions, whereby providing fast and uniformed cooling effect.
Model | EF-VS50 | EF-VS100 | EF-VS200 | EF-VS300 | EF-VS400 |
Rated Loading(kg) | 50 | 100 | 200 | 300 | 400 |
Rated Temperature(C) | 1550 | 1550 | 1550 | 1550 | 1550 |
Maximum Temperature(C) | 1650 | ||||
Temperature-controlled Precision(C) | ≤±5 | ||||
Rated Power(kw) | 60 | 120 | 150 | 180 | 210 |
Rated Supply Voltage(V) | 380 | ||||
Rated Heating Voltage(V) | According to the design and configuration to set fore-furnace transformer | ||||
Ultimate Vacuum(Pa) | ≤6.67(empty furnace and it’s cool state) | ||||
Vacuum Pressure Increasing Rate(Pa/24h) | ≤50 | ||||
Working Zone(dm) W*H*T | 3×3×4 | 3×3×5 | 4.5×4×6.7 | 4.5×4×8.5 | 6×6×10 |
Temperature Control System Configuration | SHIMADEN intelligence temperature control unit, adjustable PID operation module | ||||
Vacuum System Configuration | rotary-vane vacuum pump and roots vacuum pump | ||||
On 2018-08-08 11:45:46
