Purchase guide for vacuum Oil filter

Vacuum filter oil machine matters needing attention, stop the vacuum filters oil machine running, stop the heating system, stop the pump running, open the air valve, stop the drainage pump running, shut in and out of the oil valve, open the cooler water drain valve, a water must do, at the same time open the vacuum tank drain valve, filter, fine filter, row to besmirch, close all valves. Correct operation, careful maintenance, in order to make your oil filter normal, orderly work, forever as new.

Vacuum oil filter polymer material as a medium, set breaking emulsification, dehydration, impurity as a whole. Compound stereoscopic flash, combined with unique dehydrating and degassing elements, can quickly and effectively separate water and gas in oil. Precision filtration system, can effectively remove all kinds of impurities, long life of filter element, high pollution load, with backwash function. New electric heating system, low heating load, uniform heating, less energy consumption. Automatic infrared level control instrument, pressure protection system, simple operation, safe and reliable. Using the whole machine interlock protection device, heater, oil pump, liquid level control device linkage work. With steam turbine, water turbine and other equipment to achieve online operation.

Precautions for starting the vacuum oil filter, carefully check and maintain the equipment before and after use according to the instructions. Before oil filtration, the vacuum pump oil should be added to the oil standard to check whether all parts of the motor and electrical appliances are in good condition, whether the grounding wire is reliable, whether the tubing joints and the cabinet door are tight and smooth. Start the cold oil pump to check the water circulation of the water pipe and then start the vacuum pump to see if the steering is correct. When the vacuum in the vacuum cylinder reaches the limit, open the solenoid valve switch, oil into the heater at this time can start the heater for heating. When there is oil in the vacuum cylinder, it is necessary to start the oil discharge pump and drain oil. In the process of oil filtration, it is necessary to observe whether the instrument indication is stable and normal. The vacuum pump and the motor temperature rise are normal.