| Item | Unit | Specification | Remarks | |
| Max. swing dia. over bed | mm | 500 | ||
| Max. cutting length | mm | 500 | ||
| Max. cutting dia. | mm | 360 | Horizontal 8-station turret | |
| Max. swing dia. over saddle | mm | 320 | ||
| Type and code of spindle nose | A2-6 | Integral spindle unit | ||
| Dia. of spindle bore | mm | 65 | ||
| Headstock | Spindle speed range | r/min | 50~4500 | GSK988TA |
| Max. output torque of spindle | Nm | 177 | ||
| Spindle speed steps | Stepless | |||
| Output power of spindle motor | kW | 15(30 minutes)/11(rated) | ZJY265A-11AM-B5 | |
| Chuck | Chuck dia./type | inch | 8² | |
| Rapid speed of X-axis | m/min | 30 | ||
| Rapid speed of Z-axis | m/min | 30 | ||
| X-axis travel | mm | 200 | ||
| Z-axis travel | mm | 550 | ||
| Stroke of integral tailstock | Mm | 450 | SH36 Standard configuration | |
| Sleeve stroke | mm | 100 | ||
| Taper of tailstock sleeve taper hole | Morse | 5# | ||
| Standard turret type | Horizontal 8-station | |||
| Tool size | Outer annulus cutting tool | mm | 25×25 | |
| Diameter of boring tool rod | mm | Ф40/Ф32/Ф25/Ф20 | ||
| Whether or not nearest tool selection is available | Yes | |||
| Max. load capacity | Disc-type part | kg | 200(including chuck and other accessories) | |
| Shaft-type part | kg | 500(including chuck and other accessories) | ||
| Weight of the machine | kg | 3600 | ||
| Overall dimensions of machine | L×W×H | mm | 2300×1695×1929 | |
On 2018-08-08 11:45:46
