Several points that should be paid attention to when muffle furnace is maintaine

Muffle furnace is a general heating equipment, which can be divided into box furnace, pipe furnace and crucible furnace according to its appearance.

So long-term use of muffle furnace, also should pay attention to the maintenance and maintenance of muffle furnace equipment, the following should pay attention to the maintenance of muffle furnace for you to learn:

1. Muff furnace shall clean the waste material adhered around the electrode protective ring, hard mass, debris adhered to the end wall and accumulated material on the end wall.

2. Remove the pillar and small wall after the waste material in the bottom of muffle furnace resistance furnace is thoroughly poured with water. When demolishing the small wall, it is strictly prohibited to lift and unload two furnace walls at one time. After all the waste materials under the bottom and the electrode of the furnace are cleared into the pool, the pillar and furnace wall shall be hoisted.

3, muffle furnace resistance furnace wall put to be stable, the gap between the two walls to be symmetrical.

4, muffle furnace installation pillar and furnace wall, must use closed hook. To protect the bottom of the furnace and prevent electricity leakage before lifting.

5. When the insulation brick on muff furnace pillar falls off 1/3 and the end of furnace wall falls off 3 bricks one after another, it should not be continued to be used, but should be repaired immediately.

6. When muffle furnace is cleaning the foundation pit storing pillars, grab bucket and operators are strictly prohibited to enter the pit at the same time to prevent accidents

Application scope of Muffle furnace:

(1) Muffle furnace thermal processing, industrial workpiece processing, cement, building materials industry, small workpiece thermal processing or treatment.

(2) Muffle furnace pharmaceutical industry: used for drug testing, medical sample pretreatment, etc.

(3) Muffle furnace analysis chemical industry: as a water quality analysis, environmental analysis and other fields of sample treatment. It can also be used for oil and its analysis.

(4) Muffle furnace coal quality analysis: used for determination of moisture, ash, volatile matter, ash melting point analysis, ash composition analysis and element analysis.