During the beginning of winter, the number of rainy days gradually increased in the south, and the moisture phenomenon became more and more obvious. Rainy weather conditions tend to make wood moisture content on the high side, high air humidity, improper dry maintenance, easy to make wood moisture regain, mildew and rot, seriously affect the quality of wood, increase the production cost of enterprises, not conducive to final sales. Therefore, the choice of appropriate wood drying equipment has become the current concern of enterprises.
According to the traditional way of boiler burning, a large amount of coal, crude oil and other sources of heat, through continuous human duty, relying on artificial experience drying wood. However, this method is not only highly polluting, but also relatively backward in production technology. In addition, the traditional wood drying method cannot accurately control the temperature and humidity of the baking room, and the wind field in the kiln is not uniform. From the heating method to the control system, there are technical shortcomings. The lumber of such drying often moisture content is substandard, dry wet is not even, return the problem such as possible occurrence moisture, craze. Enterprises not only waste a lot of manpower, material resources and financial resources, it is more difficult to achieve environmental benefits.
At present, the National Energy Administration and the Ministry of Environmental Protection have jointly formulated and issued targets and tasks for the transformation of coal power into ultra-low emission and energy conservation by all provinces (autonomous regions and municipalities directly under the Central Government) for 2016. The fiscal subsidy policy of "coal-to-heat pump" has been put in place to accelerate China's process of saving and emission reduction. Drying method of drying equipment has become the first choice of many wood manufacturers, which not only meets the requirements of national environmental protection policy, but also can effectively dry wood and balance moisture content.
From the robot to the unmanned vehicle, China's manufacturing industry is continuously injected into intelligent elements of science and technology, to breakthrough the bottleneck of traditional drying industry, the original intelligent heat pump of hot wood drying equipment has come into being, is now in hubei, guangdong, more enterprises to promote the drying room to use, efficient dehumidification, balance the wood drying effect of preserve one's health is also recognised by the owners. According to the product analysis of Thermal-gen, the drying equipment of this enterprise has the following advantages:
1. Deep dehumidification:
When the moisture content drops to 25%, the working efficiency of the traditional heat pump unit decreases rapidly, and it is difficult to achieve the final moisture content of 6%-10%. Thermal-gen multifunctional balance dryer HGCS - 18D controls the moisture content of wood in 6%-10%, which can achieve deep dehumidification in humid and rainy weather in the south.
2. Constant temperature and humidity:
The unit has refrigeration dehumidification, heating dehumidification and other operating modes, the temperature of the baking room is controlled at 25-65℃, the relative humidity is 30-45%, so that the moisture content of the wood remains stable, preventing deformation, cracking, moisture regain and other problems, and ensuring the quality of the wood.
3. Intelligent control
Business owners can connect with mobile phones through wifi to save manpower, realize one-button switch, real-time view, adjust and control the drying process, and avoid excessive drying caused by information is not timely.
4. Environmental protection and no exhaust gas
Thermal original wood intelligent drying equipment, the equipment adopts electric heating, no need to burn coal and wood, achieve clean production pollution-free emissions, for the enterprise to create a safe and clean production environment.
5. Meet the requirements of wood balance, health preservation and secondary drying
It has special dehumidification technology, intelligent control of dry humidity in the kiln, plays a balanced role in the treatment of wood, and can completely eliminate the residual drying stress in the drying process. Ensure that wood maintains moisture content requirements in the end product area.
In lumber drying process, a lot of lumber business can ignore a few details, after lumber is dried, achieve corresponding moisture content, the balance dehumidification that pays attention to lumber even, drying twice. Not at will pile up wood in the open air, cool place, wood easy to be affected by the air for many times moisture regain, warping phenomenon. In addition, the sawn timber that does not need immediate processing will be placed in a constant temperature drying room to reduce the difficulty of reprocessing. With the use of wood balance health drying equipment, can effectively avoid the above problems, help enterprises easily profit.
On 2018-08-08 11:45:46
