Vacuum Furnace for 3D printing medical
Voltage AC | 220v | Power | 12kW/18kW |
Size | 180x200mm/200x300mm | Room temperature | 1000℃ |
Limit temperature | 1100℃ | Heating element | Kanthal |
Rate | 1-200℃/min adjustable | Furnace tube | Quartz, Stainless steel
|
Accurary | ±1℃ | Material science | Alumina insulation material |
Atmosphere | Can pass oxygen, nitrogen, argon, chlorine and other atmospheres |
Vacuum degree | 6.67x10-3Pa Mechanical pump+Diffusion pump 6.67x10-4Pa Mechanical pump+Molecular pump |
Control mode | Fully automatic control system, with temperature correction and compensation function, 30 segment "time temperature curve" can be adjusted arbitrarily |
Application scope
3Dprinting medical
Applied Materials
Titanium alloy, nickel titanium alloy, stainless steel
Equipment operation process
Open the furnace tube and put the material into the sintering area, pre-vacuuming and pre-setting the process heating at the same time. After the heat treatment, the material can be moved out quickly to cool down quickly
