Vacuum oil filter technology features, water removal, strong ability to break emulsification. The coalescence separation technology adopted and the special demulsifying device (water separator) can not only quickly and easily separate a large amount of moisture in the oil, but also facilitate the removal of trace moisture in the oil, which can make the turbidized emulsified oil clear and transparent. Strong ability to filter impurities, and has automatic recoil function
Check the electrical equipment (all kinds of meters) of the vacuum oil filter should be inspected and tested by the test unit on a regular basis before it is put into use. The installation of the machine is stable, test run check no sway, vibration. Check whether the inlet and outlet pipelines are installed correctly, whether the external pipeline is installed firmly, and the joint between the hose and the metal pipe should be tightened with monkey hoop to prevent the pipeline from falling off during operation. Check whether the external power supply is correct and whether the power cable connected can meet the capacity requirements of the oil filter. Check that the machine housing is reliably grounded. Check that all rotating parts should be free from jamming. Test run, check the motor steering of oil pump, vacuum pump should meet the requirements. Check whether the connection of cooling water is reliable and the waterway should be unimpeded. Check whether the fire fighting equipment on site meets the requirements.
Vacuum oil filter has a number of technologies, set vacuum drying, separation engineering technology, condensation technology, adsorption technology and precision filtration technology in one. It can quickly and reliably remove water, gas, impurities, colloid, oily sludge and various pigments in oil under high vacuum. And reduce the medium loss and acid value, improve the degree of demulsification, improve the overall quality of oil. Can realize online operation, without stopping the automatic drainage, so that the waste oil to the new oil use standard, easy to operate. Such as power plants, power station steam turbine in a long-running process, moisture, dust and solid particle impurities due to various complicated reasons inevitably mixed in the turbine oil, accelerate the oxidation of oil, and add to the foam, fouling and the formation of oil sludge, cause serious emulsifying oil, lead to oil-water separation, not easily reduced oil lubrication, anti-wear properties, such as, cooling, cooling. At the same time, it causes corrosion and wear of metal parts in the steam turbine, which affects the safe operation of the steam turbine.
On 2018-08-08 11:45:46
