What are the safety specifications for high temperature tube reheating furnace

High temperature tube heating furnace is widely used in petroleum, chemical industry, metallurgy, machinery, heat treatment, surface treatment, building materials, electronics, materials, light industry, daily chemical, pharmaceutical and other industries.

What are the safety specifications for high temperature tube reheating furnace? The safety technical specification for high temperature tubular reheating furnace is as follows.

1. Before burning in the gas type heating furnace, the manhole should be closed, the flue damper should be opened to 1/3 1/2, set up the fuel oil system circulation and material circulation, and prepare the burning rod soaked with diesel oil.

2. In normal operation, always check the burning condition of the furnace and adjust it at any time. If any abnormality is found, report to the leader immediately and take measures to deal with it.

3. When the furnace is shut down urgently, stop sealing the control valve with only external wind and make sure to close the hand valve in front of the furnace.

4. In case of being suspended by the heating medium, it should be saved immediately and the furnace should be filled with steam.

5. Furnace discharge personnel and superheated steam pressure gauge; Conditioning damper and flue damper; Urgent emptying equipment; Explosion door; Furnace and return elbow box to revive steam line.

6, safety, all gas heating furnace must have the following components and safety equipment. Outlet temperature active conditioning equipment; Active material oil control equipment; Temperature indicating meters for furnace, convection, furnace tube, radiation and flue;

7 point furnace temperature or stop furnace temperature should be strictly in accordance with the rules of the speed of temperature rise and drop.

8. Before burning, the remaining gas in the furnace shall be cleaned with steam first, and the burning rod shall be placed on the top of the burner, and the steam shall be opened a little after it is removed from the bottom of the furnace, and then the oil line shall be opened. Adjust the oil/gas ratio to normal after lighting the oil/gas fire.

9. When burning, the fireman should not face the fire mouth or look at the fire window to avoid backfiring. If the flame subside, the fuel valve should be closed immediately, and the furnace can be re-incinerated after the internal steam purge.

10. When entering the furnace for maintenance, the procedures for entering the equipment shall be handled. The explosion-proof door should not be blocked with other objects to avoid losing the explosion-proof effect.

11. When igniting gas, please pay attention to remove the water and condensing oil, and empty it at a safe address for more than 15 minutes. After analysis, the oxygen content is less than 1%, then it can be put into incineration. The gas must go through the arrestor before it enters the furnace.

12. New furnace operation must be conducted in accordance with the regular procedures, heating curve oven.

13. In case of fire in the furnace caused by the burst of the furnace tube or urgent situation requiring people to enter the furnace for disposal, use steam to revive and cool down; spray water into the furnace to revive and cool down is strictly prohibited.

Safe operation is very important, please bear in mind that the above is to introduce you about the relevant knowledge of high temperature tube heating furnace. To help you understand the high temperature tube furnace more quickly.