In fact, the sludge filter press is a box filter press, and the box filter press evolved from the plate and frame filter press. China has a long history of using filter press. From industry to light industry, food industry has the figure of filter press
What is the composition of sludge filter press
1. Thrust plate: it is connected with the support, and one end of the filter press is located on the foundation. The middle of the thrust plate of the box type filter press is the feed hole, and there are four holes in the four corners. The holes in the upper two corners are the inlet of washing liquid or pressed gas, and the lower two corners are the outlet (undercurrent structure or filtrate outlet).
2. Pressing plate: it is used to compress the filter plate and filter frame, and the rollers on both sides are used to support the pressing plate to roll on the track of the girder.
3. Girder: it is a load-bearing member. According to the anti-corrosion requirements of the service environment, it can be coated with rigid polyvinyl chloride, polypropylene, stainless steel or new anti-corrosion coating.
On 2018-08-08 11:45:46
