What should be paid attention to when grinding CNC lathe

Generally speaking, each side of the tool of CNC lathe needs to be ground very smooth and black, so that the tool can be durable, and then the blade must be ground very fine. Next, to tell you what CNC CNC lathe tool grinding should pay attention to.

1. Before grinding the cutter with CNC lathe, check whether the grinding wheel has cracks and whether the nut of grinding wheel shaft is tightened, and use it after trial run to avoid the grinding wheel breaking or flying out and hurting people.

2. Do not use too much force on the grinding tool, otherwise the hand will slip and touch the grinding wheel surface, resulting in industrial accidents.

3. Wear protective glasses when grinding CNC lathe to avoid grit and iron chips flying into eyes.

4. Do not stand against the rotation direction of the grinding wheel when grinding the CNC lathe to prevent accidents.

5. When grinding the small cutter head, the small cutter head must be installed on the cutter rod.

6. According to the experience analysis, the gap between the grinding wheel bracket and the grinding wheel should not be greater than 3mm. If the gap is too large, it should be adjusted properly.