Heat Treatment Industry News
Two methods to prevent quenching defects
In the production of heat treatment, the improper heat treatment process often brings defects to the workpiece, such as oxidation, decarburization, overheating,
more>Oil-water separator of maintenance and care
I believe that many friends of the kitchen oil and water separator of the water is not strange, unscrew the drain valve below the oil and water separator, and t
more>What problems should be paid attention installing oil and water separator?
General oil and water separator has two installation methods, one is on the ground, the other is in the ground. In order to make the equipment fully play its ro
more>What should be considered when choosing an oil-water separator?
The oil and water separator is generally used to treat oily wastewater and plays a very important role. In order to facilitate the later use, users are advised
more>What is the principle of oil-water separator?
Oil and water separator is the oil and water will not be separated from the instrument, the principle of the first is based on the density difference between wa
more>What are the proper ways to use an oil-water separator?
On the basis of more in-depth study of oil and water separation mechanism, according to the relevant theoretical research announced the efficient evaporation eq
more>Where is plate heat exchanger not suitable for application?
The operating temperature is below 250℃The operating temperature of the plate heat exchanger depends on the acceptable temperature of the gasket. When using ru
more>Plate heat exchanger design method of average temperature difference method
1. Calculate the unknown temperature or flow, calculate the unknown temperature or flow through the heat balance equation, and calculate the heat load Q at the
more>Plate heat exchanger of composition and function
What are the components of plate heat exchanger and what are the functions of each component?Plate heat exchanger of overview:Plate heat exchanger is a new type
more>Heat exchanger parking for precautions
Under normal circumstances, the heat exchanger does not need to stop, when the resistance rise over the allowable value, backwash and no effect, production capa
more>