Heat Treatment Industry News
Aluminum alloy heat treatment characteristics and principle
1. Principle of aluminum alloy heat treatmentThe heat treatment of aluminum alloy castings is to select a certain heat treatment specification, control the heat
more>Introduction to heat treatment workers
Annealing of steel: annealing is a heat treatment process in which the steel is heated to a temperature above or below the critical point AC1, and after a certa
more>1600 ℃ high temperature annealing furnace
The 1600 ℃ heat-shielding high-vacuum annealing furnace is a vacuum furnace specially developed by Nuotai Technology for manufacturers and laboratories. The pr
more>1400 degree double temperature zone vacuum tube atmosphere furnace
Product overview:The heating element of 1400 degree double temperature zone vacuum tube furnace is silicon carbide rod;Double layer air cooling structure;High p
more>Properties and maintenance of silicon carbon rods
(1) Silicon-carbon rod (SiC) electric heating element is a rod-shaped non-metal high-temperature electric heating element made of green high-purity hexagonal si
more>Properties and maintenance of silicon molybdenum rods
a. Silicon-molybdenum rods are extruded and sintered by powder metallurgy. If silicon and molybdenum are mixed uniformly and their particle sizes are normally d
more>Use of experimental electric furnace and high temperature furnace
Experimental electric furnace and high temperature furnace are important heating equipment. Use the experimental electric furnace correctly and reasonably. The
more>Gas nitriding furnace equipment characteristics
(1) gas nitride furnace treatment temperature is low, the time is short, the workpiece deformation is small.(2) gas nitriding furnace is not limited by steel ty
more>Well type furnace spreader before opening furnace preparation
What preparations should be made before the well type furnace spreader is opened? Let's look at the explanation of multi-purpose furnace manufacturer togeth
more>Stainless steel tube annealed not bright
Under normal circumstances, the stainless steel tube will be bright after bright annealing in the annealing furnace. If there is no bright situation, it is nece
more>