RVS-D series vacuum Debinding& Sintering Furnace is mainly used in the base Alumina(Al2O3), zirconia(ZrO2) and other precision components ceramics, oxide sintered in vacuum or carrier gas absorbent and high temperature sintering.
Alumina/zirconia Ceramic Vacuum Sintering Furnace | |||||||
Models | Effective Working Dimension (mm) | Max Temp. (℃) | Ultimate Pressure (Pa) (Empty) | Pressure Rising Rate (Pa/h) | Temp. Uniformity (℃) | Gas Type | Loading Capacity (kg) |
RVS-335-D | 300x300x500 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 100 | |
RVS-446-D | 400*400*600 | 1700/2000 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 200 |
RVS-557-D | 500*500*700 | 1700/2000 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 300 |
RVS-669-D | 600*600*900 | 1700/2000 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 500 |
RVS-7710-D | 700*700*1000 | 1700/2000 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 700 |
RVS-8812-D | 800*800*1200 | 1700/2000 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 1000 |
RVS-9915-D | 900*900*1500 | 1700/2000 | 6.7*10-4 | 0.67 | ±5 | N2/Ar | 1200 |
Remark: The working zone of equipment could be customized base on customer’s production. The data based on empty, cold furnace. | |||||||
In the same furnace can be achieved continuous and sintering of two production processes. With the furnace of debinding and sintering, exempt products repeatedly shifting, heating and cooling, improve product quality, shorten the production cycle, improve production efficiency.
The control system was controlled by PLC, temperature was controlled by intelligent temp controller, accurate control, high automation. User can choose auto or manual undisturbed switching to operate it, this furnace has abnormal condition alarming function, easy to operate.
Environmental protection performance has been improved, maintenance cost saving, energy cost saving.
On 2018-08-08 11:45:46
