Heat Treatment Technology
Heat treatment of beryllium bronze
Beryllium bronze is a widely used precipitation hardening alloy. After solid solution and aging treatment, the strength can reach 1250-1500 mpa (1250-1500 kg).
more>Tool vacuum heat treatment technology
The cold wall vacuum heat treatment furnace with oil and gas quenching and cooling was developed in 1970s and produced in series in 1980s. At present, local man
more>Leakage Detection Method of Plasma Nitriding Furnaces
Plasma nitriding furnaces belongs to the category of low vacuum equipment. Usually, after a period of use of equipment, air leakage will exist. In the case of s
more>Heat Treatment of Plastic Mould
Manufacturing Technology of Plastic Mould1. Dies Made of Low Carbon Steel and Low Carbon Alloy SteelFor example, the technological routes of 20, 20Cr, 20CrMnTi
more>Vacuum Heat Treatment Technology for Dies and Moulds
Successful development and application of computer simulation technology for heat treatment process (including structure simulation and performance prediction t
more>Heat treatment question and answer
1. What are the commonly used quenching methods? Explain the principles of selecting different quenching methods?Single liquid quenching - the process of coolin
more>Vacuum Heat Treatment Furnace Application
Vacuum furnaces have not been developed for a long time in our country. Because of the high production cost and large one-time investment, their application sco
more>Surface Treatment Technology of Die
In addition to the reasonable matching of high strength and toughness of the matrix, the surface performance of the die is very important to the working perform
more>Prehardening Technology of Die Materials
Heat treatment is a long-term process used by most dies in the manufacturing process. Since the 1970s, the idea of Pre-hardening has been put forward internatio
more>Vacuum heat treatment for die manufacturing
Vacuum heat treatment technology is a new type of heat treatment technology developed in recent years. Its characteristics are urgently needed in die manufactur
more>