Heat Treatment Furnace For Aluminum Alloy Conductor Wire
Heat Treatment Furnace For Aluminum Alloy Conductor Wire
Introduction:
1. Steel frame fiber fixed way, does not produce thermal bridge short circuit, the fiber layer and overlay staggered way, lining thermal conductivity is small (0.09W / m), good insulation performance, high energy efficiency.
2. Dual-track door weight compression mechanism, lightweight and flexible, good sealing effect, and no additional power, the door in the lift process from the furnace door, leaving the door of the compression of the soft side without damage.
3. The use of fiber lining the overall weight of light, heat loss is small, fast heating, thereby reducing the heating power, saving energy, compared with the refractory bricks, saving about 20% energy consumption, and the service life is much higher than the refractory lining, extending the overhaul period.
4. In the furnace side to install a control box, can intuitively on-site control (trolley access, the door of the lift and fan stop action), to reduce the operator's labor intensity, thereby reducing the equipment failure rate, To ensure the safe use of equipment.
Technical parameter:
Rated power | 320KW |
Rated temperature | 450℃ |
Temperature heating zone | 2 zone |
Working size | 4500×2000×1800mm(LxWxH) |
Unloading heating time | ≤1.5h(Room temperature -450℃) |
With loading heating time | ≤4h(Room temperature -300℃) |
Trolley Loading capacity | 15T |
Trolley moving motor | 3.0KW |
Trolley moving speed | Max 6m/Min |
Furnace outer cover temperature | ≤room temperature+20℃ |
Furnace door temperature | ≤room temperature+30℃ |
furnace temperature uniformity | ±5℃ |
Furnace door motor | 3.0KW |
Heat cycle fan motor | 7.5KW(Inverter motor ) |
Heat cycle fan quantity | 2 PCS |
Air volume | 14000~18000m/h |
Air pressure | 1700~1200Pa |
Loading capacity | 3 PCS 1600 bobbin with conductor |
Outline dimension | 6800×3500×5600mm(LxWxH) |
Space size | 12500×3500×5600mm(LxWxH) |
Power supply | 380V-50HZ-5 wires |
Weight | 20T |
