PVC Fill FRP Water Cooling Tower
Production of various fiberglass cooling tower parts, cooling tower fan and cooling tower special motor, cooling tower special reducer, cooling tower water, cooling nozzle, resin, fiber cloth, etc.
Fan: the fan is an important part of the cooling tower. The cooling tower produced by our factory has large diameter, wide blade and low speed, large volume aluminum alloy fan, uniform wind speed, low noise, 10% - 10% reduction of power consumption ratio, which is similar to the domestic products.
Motor and reducer: the cooling tower adopts special outdoor vertical machine, 150 cooling tower fan and motor direct connection. The cooling tower above 200 adopts reducer drive, which features stable operation, long service life, convenient maintenance and management, and reasonable motor power matching. Compared with the cooling water of other similar cooling towers, the energy-saving effect is obvious.
Water cloth: the water cooling tower is equipped with a rotating cloth, which can automatically rotate the cloth by using the reverse force of water. If it is lower than 150, it is made of phosphor bronze and nylon fabric, which is composed of inner shell. More than 200 cloth of water, aluminum alloy, bearings are installed in the interior, so the rotation is flexible, wear-resistant, can bear or bear damage, reliable use, low air supply pressure, which is conducive to energy saving. Position of holes for multiple exercises to adjust the angle and change the speed of water distribution device. Special requirements, color spray nozzle cloth.
Product | Specifications | Namethickness | volume | capacity |
The steps trapezoidal wave | 1000*500 | 0.4 | 31 | 40 |
"T" Wave | 1000*500 | 0.4 | 33 | 33 |
The difference of a sine wave | 1000*500 | 0.4 | 30 | 30 |
"V" Wave | 50*25*60 | 0.4 | 38 | 28 |
"S" Wave | 1000*500 | 0.4 | 28 | 28 |
PVC Hexagonal honeycomb shape | Ø20 | 0.5 | 13.3 | 75 |
Ø25 | 0.5 | 17 | 58 | |
Ø30 | 0.5 | 18.9 | 53 | |
Ø35 | 0.5 | 20 | 50 | |
Ø40 | 0.5 | 22 | 45 | |
Ø50 | 0.5 | 24 | 41 | |
PP Hexagonal honeycomb shape | Ø20 | 0.5 | 15.8 | 63 |
Ø25 | 0.5 | 20 | 50 | |
Ø30 | 0.5 | 22 | 45 | |
Ø40 | 0.5 | 25 | 40 | |
Ø50 | 0.5 | 28 | 35 | |
Ø60 | 0.5 | 31 | 31 | |
FRP Hexagonal honeycomb shape | Ø25 | 0.5 | 12 | 90 |
Ø35 | 0.5 | 14 | 75 | |
Ø40 | 0.5 | 18 | 55 | |
Ø50 | 0.5 | 21 | 48 |
