pit type electric resistance high temperature heating furnaces
Brief introduction
It is suitable for annealing heat treatment of various standard parts and wires, especially for bright annealing heat treatment of various steel wire, copper wire, aluminum wire, carbon steel, alloy steel parts and magnetic materials under protective atmosphere.
pit type electric resistance high temperature heating furnaces Characteristic:
1). Reasonable structure, even furnace temperature, small temperature difference between upper and lower working area, especially suitable for heating and heat treatment of long axis workpiece.
2). With energy-saving lining, the heating is fast, the empty furnace consumption is low, and the energy is saved more than 20% compared with the old products.
3). The control system can be equipped with general control instruments or instruments with microprocessor program control according to the actual needs.
4). When it is needed in the process, the protective atmosphere can be fed into the furnace to realize little oxidation heating.
5). Each product is equipped with safety interlock and over temperature device to provide reliable and safe operation and use.
Model and parameters:
Model | Rated Power (kw) | Rated | Rated Temperature (centigrade) | Phases | Effective Size of Muffle Jar (Hearth) (mm) |
RJ-35-8Z | 35 | 380 | 850 | 3 | Φ500*650 |
RJ-55-8Z | 55 | 380 | 850 | 3 | Φ650*900 |
RJ-75-8Z | 75 | 380 | 850 | 3 | Φ900*1200 |
RJ-45-8Z | 45 | 380 | 850 | 3 | Φ600*900 |
RJ-65-8Z | 65 | 380 | 850 | 3 | Φ600*1100 |
RJ-90-8Z | 90 | 380 | 850 | 3 | Φ950*1250 |
RJ-120-8Z | 120 | 380 | 850 | 3 | Φ950*1500 |
RJ-150-8Z | 150 | 380 | 850 | 3 | Φ950*2400 |
