Length tolerance

± 2% or 3.2mm (1/8"), whichever is greater

Voltages available 

12V-480V or as customer's demand

Diameter tolerance

Diameter at each end may vary +0.05mm -0.1mm (+.002 -.004)

Internal thermocouple

type J or K;

Thermocouple Location

Disc End, Sheath, Center of Heater

Maximum leakage current (cold) 

≤ 0.5 mA;

Resistance tolerance

+10%, -5%

Wattage Tolerance

+5%, -10%

Wattage density

high/middle/low(5-25w/cm2)

Sheath Material

SUS 304/316L/201 Incoloy 800

Standard Cold Zone

5-10mm