High performance car type iron forging heating furnace
Product Description
1. Various of combustion gases as the medium, heating through the various types of burner combustion, the maximum temperature up to 1200 ℃.
2. Furnace frame welded by a variety of large and medium-sized shaped steep in the site. Shell is color steel plate. High-alumina full fiber refractory silk blanket module for the lining. Sealing and energy-saving effect is obvious.
3. Car frame welded by a variety of large I-beam steel, channel steel, angle steel and thick steel plate and other combinations.
4. The drive is reliable. The transmission system adopts motor - reducer. The installation method is shaft-mounted. Compact structure, strong assembly, flexible access, simple operation and convenient maintenance.
5. Car refractory masonry with high aluminum stereotypes brick structure, the sealing effect is good, high compressive strength. The car sets the iron plate for the stacking of the workpiece. The sealing of car and lining with automatic compression structure. Open and close of the side seal connects with the furnace in & out system.
6. The door is made of high-alumina full fiber refractory silk blanket and steel frame structure. Electric hoist lift. Door sealing mechanism with long levers spring-type automatic compression cam mechanism and soft side seal device. That ensures no friction from top to bottom, easy, safe and reliable.
7. Chimney installed automatic pressure control device and butterfly valve, etc., can adjust the cooling rate.
8. Heating with high-speed burner, evenly distributed on both sides. The actuator adjusts the air flow, adjusts the amount of gas by the proportional valve, there is lower limit of the gas and the air flow, the control tube is equipped on the gas pipe of each burner, and each burner is equipped with independent and complete combustion Controller which with automatic ignition, flame detection, fire alarm and automatically cut off gas features.
Product Application
Heat treatment equipment provides annealing, tempering, quenching, carburizing, nitriding, heating to the workpieces.
Heat treatment furnace is common name of various kinds of industrial furnace which provide metal heating treatment to all kinds of metal workpieces. It has lower temperature compared with heating furnace. Heat treatment furnace can be adopted with all models of heating furnaces but asks more stringent temperature control and furnace atmosphere.
Heat treatment furnace is divided into annealing furnace, quenching furnace, tempering furnace, normalizing furnace, quenching and tempering furnace, carburizing furnace, nitriding furnace, melting furnace. Mainly used for high chromium, high manganese steel castings, ductile iron, roll, steel, stainless steel quenching, annealing, aging and a variety of mechanical parts heat treatment. Welding parts to eliminate stress annealing, aging and other heat treatment process. Heating methods are electric heating, fuel, gas, coal, hot air circulation and etc.
Main technical parameter
Maximum temperature: 1200℃;
Working temperature: 650-950℃;
Rated voltage: 380V;
Workspace: 10*4*4m(L*W*H);
Max. loading capacity(t): 300;
Narural gas consumption(m3/h): 800-1200.
