Roller Hearth Heating Furnace for Gas Cylindrer
Loading → transfer the gas cylinder to the loading conveyor of the quenching furnace through the overhead crane → open the door of the quenching furnace → transfer the gas cylinder to the quenching furnace quickly → heat the gas cylinder inside the quenching furnace (at the same time, the gas cylinder moves slowly to prevent the roll deformation and increase the heating uniformity) → open the middle door (heat insulation) → transfer the gas cylinder to the heat preservation area of the quenching furnace quickly (at the same time, the gas cylinder moves slowly In order to prevent roll deformation and increase the uniformity of heat preservation) → after the processing time is completed → unload the door and unload the cylinder quickly → close the door, transfer the cylinder to the side discharge conveyor of the quenching tank → transfer the cylinder to the quenching tank for quenching. At the same time, the transporter moves up and down to homogenize the quenching medium and ensure the quenching quality → lift the steel cylinder with the transporter → transport the steel cylinder to the loading conveyor of the tempering furnace → open the tempering furnace door → transport the steel cylinder to the tempering furnace for heating (the working sequence, the beat time and the control mode are the same as those of the quenching furnace) → open the tempering furnace door after reaching the process time → discharge the material quickly → transfer the cylinder Transfer to discharge conveyor, cool and wait for discharge → complete a cycle.
