3-6mm Diameter Space Heaters Cartridge Heating Element
3-6mm Diameter Space Heaters Cartridge Heating Element
Application:
Injection moulding-Internal heating of nozzies
Hot runner systems-Heating of manifolds
Packaging industry-Heating of cutting bars
Packaging industry-Heating of hot stamps
Laboratories-Heating of analytical equipment
Medical:Dialysis,sterilization,Blood Analyzer,Nebulizer,Blood/Fluid Warmer,Temperature Therapy
Telecommunications:Deicing,Enclosure Heater
Transportation:Oil/Block Heater,Aiecraft Coffee Pot Heaters,
Food Service:Steamers,Dish Washers,
Industrial:Packaging Equipment,Hole Punches,Hot Stamp.
CARTRIDGE HEATER - TECHNICAL DATA | |
Outer Sheath Material | Stainless Steel 304, 321, 316; Incoloy 800; Incoloy 840 |
Resistance Heating Wire | NiCr 80/20 wire |
Wattage Tolerance | +5%, -10% |
Resistance Tolerance | +10%, -5% |
Voltage Available | 12 to 440 volts customied |
Maxium Heating Temperature | 800 Degree Celsius |
Length Tolerance | ±1mm |
Diameter Tolerance | ±0.02mm |
Standard Cold Size | 5-10mm |
Insulation Resistance (cold) | ≥ 500 MΩ |
Maxium Leakage Current (cold) | ≤0.5 mA |
Lead Orientation | A) Crimped on Leads : PTFE/Fiberglass Flexible lead crimped on solid pin emerging from the Heater. |
