well type gas nitriding heat treatment furnace
Well type gas nitriding furnace is mainly used for gas nitriding of carbon steel parts, die quenching and other heat treatment. The furnace is equipped with a drip irrigation device and can also be used for the heat treatment of gas nitrocarburizing (soft nitriding). When drip irrigation device is used without ammonia gas, it can be used as a general well tempering furnace.
1) Obtain high surface hardness
2) Increase wear resistance and wear resistance
3) Increase fatigue life
4) Improve corrosion resistance
5) The surface with anti thermal softening effect at the temperature up to nitriding temperature was obtained.
technical parameter:
Model | Rated Power (kw) | Rated Voltage (V) | Rated Temperature | Phases | Effective Size (mm) |
RN2-25-6 | 25 | 380 | 650 | 3 | Φ400*550 |
RN2-35-6 | 35 | 380 | 650 | 3 | Φ450*650 |
RN2-45-6 | 45 | 380 | 650 | 3 | Φ450*1000 |
RN2-60-6 | 60 | 380 | 650 | 3 | Φ650*1200 |
RN2-75-6 | 75 | 380 | 650 | 3 | Φ800*1300 |
RN2-90-6 | 90 | 380 | 650 | 3 | Φ800*1800 |
well type gas nitriding heat treatment furnace application:
The equipment is suitable for gas nitriding of various dies (especially H13), measuring tools, cutting tools (such as high-speed steel tools), crankshafts, gears, cylinder liners, mechanical parts and wearing parts. Heat treatment of high temperature resistant parts.
