Ceramic discharge sintering furnace
Our box furnaces are the most cost-effective high temperature muffle furnaces. The furnace consists of high quality alumina fiber bricks and specially designed MoSi2 heating elements. The furnace temperature is controlled by a high precision SCR (silicon controlled rectifier) digital controller with an accuracy of ±1℃ and can be programmed in 51 segments. It is an ideal tool for annealing and sintering materials in your research laboratory.
Ceramic discharge sintering furnace main technical indicators:
| Max. Temperature | 1700℃ |
| Working temperature | ≤1600℃ |
| Heating elements | MoSi2 heater |
Temperature controlling | PID automatic control via SCR (Silicon Controlled Rectifier) power control with phase angle fired, current limiting resistor. 51 programmable segments for precise control of heating rate, cooling rate and dwell time. Built in PID Auto-Tune function with overheating & broken thermocouple broken protection. Over temperature protection and alarm allows for operation without attendant. |
Temperature accuracy
| ±1℃ |
Temperature Uniformity | ±1℃ |
Heating rate
| 0-15℃/min |
| Thermocouple
| B type |
| Furnace structure | Double layer steel casing with dual cooling fan, surface temperature below 60℃ |
| Furnace door | Front-side open,Power cutting off when furnace door open |
| Working voltage | 220V 50HZ |
| Chamber size | 200x200x300mm |
| Stock | 6 SETS |
| Screen | Press screen |
Ceramic discharge sintering furnace furnace body structure
The surface is not painted, electrostatic spraying, luxurious and beautiful.
The shell is a double-layer air-cooled structure with a surface temperature ≤ 50 ° c
The furnace and control cabinet are designed as one, with compact structure.
Control panel layout reasonable, display quality.
