Surface Thermocouple for Industrial Furnace
Surface Thermocouple for Industrial Furnace
Surface Thermocouple for Industrial Furnace is used in industry for measuring the temperature of gases, liquids or solid surfaces etc., Its usually assembled with indicators, recorders or computers.
A Surface Thermocouple for Industrial Furnace consists of two dissimilar metals joined together at one end. When the junction of the two metals be cooled or heated and a voltage is produced that can be correlated back to the temperature.
Hongtai company providing Surface Thermocouple for Industrial Furnace are manufactured in different combinations of metals. The calibrations are K, N, E.J, T, S, R, B. Each calibration has a different temperature range.
Main Specification of Surface Thermocouple for Industrial Furnace
Category | Code | Temperature Range |
Ni-Cr-Si----Ni-Si-Mg | N | -40°C to 1000°C |
Ni-Cr----Ni-Si | K | |
Ni-Cr----Cu-Ni | E | -40°C to 800°C |
Fe----Cu-Ni | J | -40°C to 750°C |
Cu----Cu-Ni | T | -40°C to 350°C |
Pt-Rh13----Pt | R | 0°C to 1000°C |
Pt-Rh10----Pt | S | 600°C to 1600°C |
Pt-Rh30----Pt-Rh6 | B | 600°C to 1700°C |
Main Features of Surface Thermocouple for Industrial Furnace
Name | Surface Thermocouple for Industrial Furnace |
Indexing Number | K J T E |
Level | I grade II grade |
Temperature Measurement Point | Pick shell Insulation Dew Point |
Thread | 1/4 5/16 M4 M6 M8 M12 |
Pipe Diameter | Φ1.0 to Φ8 |
Pipe Material | 304 316L etc. |
Lead Wire | String glass fiber PVC Teflon Silica Gel |
Temperature Range | -50 degree to 950 degree |
