Laboratory vacuum furnace
Laboratory vacuum furnace in the furnace chamber within a particular space using vacuum system (by the vacuum pump, vacuum measuring device and vacuum valve components such as carefully) substances out of furnace cavity part, making furnace chamber pressure is less than a standard atmospheric pressure, so as to realize a vacuum furnace cavity space, this is the laboratory vacuum furnace.
Performance characteristics of laboratory vacuum furnace:
1. Industrial furnaces and experimental furnaces heated by electric heating elements in a state close to vacuum. Equipment for heating in a vacuum environment. Connect to the high vacuum pump system by pipe in a metal housing or quartz glass enclosed furnace.
Mainly used for ceramic firing, vacuum smelting, electric vacuum parts degassing, annealing, brazing of metal parts, as well as ceramic, metal sealing, etc.
2. It can eliminate the oxidation and decarburization of the workpiece surface in the thermal process, and obtain a clean surface without deterioration layer. This greatly improves the cutting performance of tools that grind only one side of the cutting surface, such as a twist drill that exposes the decarburized surface of the groove directly to the cutting edge.
3. The measurement and monitoring accuracy of furnace temperature is significantly improved. The indicating value of the thermocouple is ±1.5°c with the furnace temperature. However, the temperature difference between different parts of a large number of workpiece in the furnace is large. If rarefied gas is used for forced circulation, it can still be controlled within the range of ±5°c temperature difference.
4. High degree of mechatronics. On the basis of the improvement of temperature measurement and control accuracy, the workpiece movement, air pressure regulation, power regulation can be pre-programmed, according to the steps to implement quenching and tempering.
5. Energy consumption is significantly lower than that of salt bath furnace. The modern advanced vacuum furnace heating room adopts the thermal insulation wall and barrier made of excellent thermal insulation material, which can highly concentrate the electric heating energy in the heating room, and the energy saving effect is remarkable.
I hope the above performance characteristics of SIMUWU laboratory vacuum furnace are helpful to you. The main producers of the relevant laboratory vacuum furnace will have to say to the professional and nice SIMUWU vacuum furnace, the company is committed to development, oven, drying oven, test chamber, disinfection box, box-type electric furnace, constant temperature trough, muffle furnace, take the lead in successfully developed by our company and investment, batch production of tight oven, forced convection drying oven is the present domestic even better drying oven, aging equipment.
Are widely used in the electronics industry, PCB, electronic capacitors, LED optoelectronic components such as higher requirements on temperature uniformity of production enterprises, its performance can be comparable to similar foreign products, the new type of high temperature sintering box, aging test chamber, solved the problem of the wheel bearing and placed goods stable, ptfe deeply, rubber, electrical insulation materials and other industry users.
SIMUWU has strong technical force and powerful product development function. The factory department has set up a professional product r&d center, which can customize oven, incubator, sintering box, disinfection box, test box, water tank, oil tank, muffle furnace and other constant temperature equipment and sample preparation equipment of various special specifications.
